Hi Shane,
I'll have to see If I can configure my fax to my VOIP line.
Don't you just love modern tech!
Thanks for responding,
Paul
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| F style mando peghead specs http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9022 |
Page 1 of 1 |
| Author: | 1bordeaux [ Thu Oct 26, 2006 10:12 am ] |
| Post subject: | |
Hi Folks, I'm designing a logo for a client and I don't have a good reference pattern. Does a 2" X 5/8" logo seem balanced for the space available on the peghead of an F style mando? Thanks in advance! Paul |
|
| Author: | Shane Neifer [ Thu Oct 26, 2006 10:46 am ] |
| Post subject: | |
Paul PM me your fax number and I will fax a copy of an F style mando headstock to you from Siminoff's book. THen you will have it! Shane |
|
| Author: | 1bordeaux [ Thu Oct 26, 2006 12:22 pm ] |
| Post subject: | |
Hi Shane, I'll have to see If I can configure my fax to my VOIP line. Don't you just love modern tech!
Thanks for responding, Paul |
|
| Author: | Shane Neifer [ Thu Oct 26, 2006 1:05 pm ] |
| Post subject: | |
Paul, I can scan it if you like and then e-mail it. I am just concerned that it will introduce more distortion. But I can write the dimensions on it first and then you can re-scale it on your end if that is easier for you. Shane |
|
| Author: | 1bordeaux [ Fri Oct 27, 2006 12:08 am ] |
| Post subject: | |
If it's not too much trouble, please do. Otherwise I'll look into the FAX option. Thanks again! Paul |
|
| Author: | Shane Neifer [ Fri Oct 27, 2006 3:05 am ] |
| Post subject: | |
I am scanning it right now Paul. I will have it off to you shortly. Shane |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|